Menu
Your Cart

Hyperbaric

Drass BIBS Mask Drass BIBS Mask
On Request
Model: 97DD-05-01-02-00-00
Design and Engineering Features: Our new generation CBM-U101 DIVING COMPACT BIBS MASK has been rigorously designed, developed and tested to an operational depth of up to 400 msw in accordance with international technical and safety standards set by NORSOK. The compact Bibs Mask has been tes..
2,700.00€
Drass CO2 Scrubber Assembly Drass CO2 Scrubber Assembly
On Request
Model: 97CM-06-02-01-00-00
The Drass CO2 Scrubber is used as a CO2 removal system in the hyperbaric environment, in chambers and diving bells. The design is continuously enhanced thanks to the hundreds of units installed worldwide. Thanks to its compact size and its efficiency, the installation of the Drass CO2 scrubber on bo..
2,600.00€
Model: 97CE-06-01-01-00-00
Proudly presenting the innovative Drass HUF (Hyperbaric Ultraviolet Flame) Sensor, the only flame sensor on the market to receive IACS Class Society Type Approval for use in a hyperbaric environment. Pressure tested up to 50 bar and able to detect a flame at 10 times the distance of standard f..
2,200.00€
Drass iAN4  - Gas Analyzer Drass iAN4  - Gas Analyzer
On Request
Model: 97CD-01-04
The newly released Drass product: iAN GAS ANALYZER is specifically tailored to the saturation and surface diving industry and for application in the medical industry also.This advanced solution provides our clients with both a superior measuring accuracy and a robust hardware that consists of a Disp..
Starting From 1,990.00€
Drass Interlocking Mechanism Drass Interlocking Mechanism
On Request
Model: 97CM-06-01-01-00-00
The Interlocking mechanism is a safety device intended to protect any pressure vessel subject to be opened during routine operation procedures; this includes soda lime pots, Food and Material Locks, Diving Bell Mating Clamps, etc… The requirement for such a device is present in all Rules and ..
1,900.00€
Model: 97CE-04-01-01-00-00
The Drass 2” Flow Fuses are a safety device intended to protect any PVHO (Pressure Vessel for Human Occupancy) from rapid unwanted decompression. They are to be installed internally to any PVHO on each hull passage bigger than 5 mm (ref. DNV-Os-E402 Oct. 2010 Sec. 4 E301).The main purpose of the f..
800.00€
Drass Hyperbaric Chamber Light Drass Hyperbaric Chamber Light
On Request
Model: 97CE-01-03-05-00-00
The ambient lighting system is specifically designed to illuminate the entire compartment from a ceiling position. Thanks to the lens employed, which ensures a light flux up to ten times higher than that typically installed, a bright and uniform lighting illuminates the entire comp..
Starting From 705.00€
Drass Hyperbaric Bunk Light Drass Hyperbaric Bunk Light
On Request
Model: 97CE-01-04-05-00-00
Drass Bunk lights are specifically designed for diver private lighting, and are usually located alongside each bunk. Lights are supplied with a wet connector type, a locking sleeve and the interface cable, which includes a potentiometer, to regulate the light intensity. On the bottom of the..
Starting From 705.00€
Model: F2806-550
Drass flame sensor cable is designed to accompany Drass Flame Sensor whilst being installed inside of a hyperbaric chamber.The cable is available in both 5 m and 7 m length options to suit your needs...
Starting From 150.00€
Olicrom PhysioSub PHS-900E Olicrom PhysioSub PHS-900E
On Request
Model: 821B-02-02-00-00-00
The fitness machine is designed to provide a means of keeping fit for divers in saturation conditions. The saturation condition imply usually to be restricted in hyperbaric chambers for one month. Typical dimension of a chamber is 2, 3 m diameter by 8 m for 6 divers, half-length used to sle..
0.00€
GAS MIXER GAS MIXER
On Request
Model: 96AN-03-01-01-00-00
Drass Gas Mixer is the first device of its kind capable to mix up to three given inlet gases so to obtain any required diving gas mixture. The machine creates custom gas mixtures (such as nitrox, heliox or trimix), with extremely high accuracy, and with high capacity (m..
0.00€
Model: 97DD-01-01-01-00-00
The First Stage Pressure Reducing Regulator can be installed inside an hyperbaric chamber and can be used for air and Sat, to supply gas to the BIBS. The primary function of this regulator as it has been designed is to allow operators in a hyperbaric chamber to have a reducer dedicated to e..
0.00€
Showing 1 to 12 of 22 (2 Pages)