Browse by Subcategories
On Request
Model: 97CM-06-01-01-00-00
The Interlocking mechanism is a safety device intended to protect any pressure vessel subject to
be opened during routine operation procedures; this includes soda lime pots, Food and Material
Locks, Diving Bell Mating Clamps, etc… The requirement for such a device is present in all Rules and
..
1,900.00€
On Request
Model: 97DD-05-01-02-00-00
Design and Engineering Features:
Our new generation CBM-U101 DIVING COMPACT BIBS MASK has been rigorously designed, developed
and tested to an operational depth of up to 400 msw in accordance with international technical and safety standards set by NORSOK.
The compact Bibs Mask has been tes..
1,750.00€
On Request
Model: 97CD-01-04
The newly released Drass product: iAN GAS ANALYZER is specifically tailored to the saturation and surface diving industry and for application in the medical industry also.This advanced solution provides our clients with both a superior measuring accuracy and a robust hardware that consists of a Disp..
Starting From 1,805.00€
Model: 97CE-04-01-01-00-00
The Drass 2” Flow Fuses are a safety device intended to protect any PVHO (Pressure Vessel for Human
Occupancy) from rapid unwanted decompression. They are to be installed internally to any
PVHO on each hull passage bigger than 5 mm (ref. DNV-Os-E402 Oct. 2010 Sec. 4 E301).The main purpose of the f..
On Request
Model: 97CE-01-03-05-00-00
The ambient lighting system is specifically designed
to illuminate the entire compartment from a ceiling
position.
Thanks to the lens employed, which ensures a light
flux up to ten times higher than that typically installed,
a bright and uniform lighting illuminates the entire
comp..
Starting From 705.00€
On Request
Model: 97CE-01-04-05-00-00
Drass Bunk lights are specifically designed for diver private lighting, and are usually located alongside
each bunk. Lights are supplied with a wet connector type, a locking sleeve and the interface
cable, which includes a potentiometer, to regulate the light intensity.
On the bottom of the..
Starting From 705.00€
Model: 97DD-01-01-01-00-00
The First Stage Pressure Reducing Regulator can be installed inside an hyperbaric chamber and
can be used for air and Sat, to supply gas to the BIBS.
The primary function of this regulator as it has been designed is to allow operators in a
hyperbaric chamber to have a reducer dedicated to every s..
-250x250w.jpg "Drass Flame Sensor Cable")
-250x250h.jpg "Drass Flame Sensor Cable")
Model: F2806-550
Drass flame sensor cable is designed to accompany Drass Flame Sensor whilst being installed inside of a hyperbaric chamber.The cable is available in both 5 m and 7 m length options to suit your needs...
Starting From 150.00€
-250x250w.png "Drass Chamber Fairdive")
On Request
Model: Fairdive
DRASS FAIRDIVE is a cylindrical twin-lock hyperbaric chamber. The main lock chamber accommodates a maximum of six (6) seated divers, or two (2) divers on beds. The entry lock chamber comes equipped with two foldable seats accommodating up to two (2) persons to medically assist and monitor the patien..
-250x250w.png "GAS MIXER")
-250x250w.png "GAS MIXER")
On Request
Model: 96AN-03-01-01-00-00
Drass Gas Mixer is the first device of its kind capable to mix up to three given inlet gases so to obtain any required diving gas mixture. The machine creates custom gas mixtures (such as nitrox, heliox or trimix), with extremely high accuracy, and with high capacity (m..
On Request
Model: 97CD-02
Drass Communication System (DRASS KOMMS) is a market-leading wired communication system that incorporates the latest advancements in technology and design, and complies with DNV GL, ABS and LR classification bodies.To achieve both the best performance and reliability, the design philosophy of the sy..