Menu
Your Cart

Commercial

Drass Chamber Oxysafe
On Request
Model: Oxysafe
DRASS OXYSAFE is a twin-lock hyperbaric chamber with flat ends and two (2) compartments: a main chamber and an entrance lock. The main lock chamber accommodates a maximum of six (6) seated divers, or two (2) divers on beds. The entry lock chamber comes equipped with two foldable seats accommod..
0.00€
Drass Chamber Ovetto
On Request
Model: Ovetto
DRASS OVETTO is a cylindrical twin lock hyperbaric chamber designed for two (2) persons in the main lock: one patient on a bed plus one attendant on a foldable seat. The entry lock chamber allows the locking of one (1) person and transportation on main lock chamber. It comes with a foldable seat ena..
0.00€
Drass Chamber Fairdive Drass Chamber Fairdive
On Request
Model: Fairdive
DRASS FAIRDIVE is a cylindrical twin-lock hyperbaric chamber. The main lock chamber accommodates a maximum of six (6) seated divers, or two (2) divers on beds. The entry lock chamber comes equipped with two foldable seats accommodating up to two (2) persons to medically assist and monitor the patien..
Starting From 68,824.00€
Drass Chamber Duetto
On Request
Model: Duetto
DRASS DUETTO is a versatile, dual-lock portable hyperbaric chamber with a main lock chamber and an entry lock chamber. The main lock chamber accommodates two (2) persons: one patient on a bed plus one attendant on a foldable seat. The compact entry lock chamber allows the locking of one (1) person a..
0.00€
Drass Chamber Drassuno
On Request
Model: Drassuno
DRASS DRASSUNO is a one-man portable hyperbaric chamber for commercial, military, rescue, or scuba diving. Built with an internal diameter of 650 mm, DRASSUNO is designed to support shallow water diving operations in areas, such as onboard vessels, where emergency access to a fixed recompression cha..
0.00€
DiveLink Whip at Diver to protect the long Surface to Diver Cable CAB-HW-x
On Request
Model: CAB-HW-WHIP
Whip at Diver to protect the long Surface to Diver Cable CAB-HW-x. This plugs between EAR-MIC-HW and CAB-HW-x. (This part is optional but recommended)..
0.00€
DiveLink Underwater Loudspeaker SPKR-DR for COM-DR-HYD Diver Recall Surface to Diver Unit DiveLink Underwater Loudspeaker SPKR-DR for COM-DR-HYD Diver Recall Surface to Diver Unit
On Request
Model: SPKR-DR
Underwater Loudspeaker SPKR-DR for COM-DR-HYD Diver Recall Surface to Diver Unit1/4" plug for panelUnderwater Type Connector option available..
Starting From 100.00€
DiveLink Transducer XDR-S08 on 16 M Extension for COM-S Surface to Diver Underwater Communicator
On Request
Model: XDR-S08
Transducer XDR-S08 on 16 M Extension for COM-S Surface to Diver Underwater Communicator..
0.00€
DiveLink Transducer XDR-S01 with 10 M extension for COM-S01R Headset Surface to Diver Communicator
On Request
Model: XDR-S01
Transducer XDR-S01 on 10 M Extension for COM-S01R Headset Surface to Diver Communicator..
0.00€
DiveLink Transducer XDR-08 for COM-UC Belt Packs
On Request
Model: XDR-08
Transducer for COM-UC Belt Pack Underwater Communicator(Comes with O-Ring ORG-06)..
0.00€
DiveLink Surface to Diver Underwater Communicator DiveLink Surface to Diver Underwater Communicator
On Request
Model: COM-S
The most versatile Multi-Channel Surface Unit available on the market today. For Commercial Divers, the COM-S surface unit meets all the requirements: Enough power to get through difficult signal pathways. Isolated audio interfaces that are electrically safe. Other channel line-up availa..
Starting From 3,400.00€
DiveLink Surface Conversion Kit DiveLink Surface Conversion Kit
On Request
Model: EAR-MIC-S + XDR-S08-S
If you are ordering the Belt Pack for use on the surface or in a dry submarine then you will need to order two more parts. The first is called model EAR-MIC-S which provides the person wearing the belt pack with headphones, a push-to-talk switch, MIC-S01 boom microphone and a volume control. The sec..
0.00€
Showing 25 to 36 of 57 (5 Pages)