Browse by Subcategories
On Request
Model: 97CE-05-01-01-00-00
The HGU-01 has been specifically Designed, Manufactured and Tested for Diving Decompression
Chambers (DDC) and Diving Bell applications. For what it concerns the Diving Bell it could be easily
installed either inside or outside the Diving Bell.
The Camera body is made of Stainless Steel (AI..
2,000.00€
On Request
Model: 97CM-06-01-01-00-00
The Interlocking mechanism is a safety device intended to protect any pressure vessel subject to
be opened during routine operation procedures; this includes soda lime pots, Food and Material
Locks, Diving Bell Mating Clamps, etc… The requirement for such a device is present in all Rules and
..
1,900.00€
On Request
Model: 97DD-05-01-02-00-00
Design and Engineering Features:
Our new generation CBM-U101 DIVING COMPACT BIBS MASK has been rigorously designed, developed
and tested to an operational depth of up to 400 msw in accordance with international technical and safety standards set by NORSOK.
The compact Bibs Mask has been tes..
1,750.00€
On Request
Model: 97CD-01-04
The newly released Drass product: iAN GAS ANALYZER is specifically tailored to the saturation and surface diving industry and for application in the medical industry also.This advanced solution provides our clients with both a superior measuring accuracy and a robust hardware that consists of a Disp..
Starting From 1,805.00€
Model: 97CE-04-01-01-00-00
The Drass 2” Flow Fuses are a safety device intended to protect any PVHO (Pressure Vessel for Human
Occupancy) from rapid unwanted decompression. They are to be installed internally to any
PVHO on each hull passage bigger than 5 mm (ref. DNV-Os-E402 Oct. 2010 Sec. 4 E301).The main purpose of the f..
On Request
Model: 97CE-01-03-05-00-00
The ambient lighting system is specifically designed
to illuminate the entire compartment from a ceiling
position.
Thanks to the lens employed, which ensures a light
flux up to ten times higher than that typically installed,
a bright and uniform lighting illuminates the entire
comp..
Starting From 705.00€
On Request
Model: 97CE-01-04-05-00-00
Drass Bunk lights are specifically designed for diver private lighting, and are usually located alongside
each bunk. Lights are supplied with a wet connector type, a locking sleeve and the interface
cable, which includes a potentiometer, to regulate the light intensity.
On the bottom of the..
Starting From 705.00€
On Request
Model: CAB
Plugs into Hardwire Surface Unit COM-S-HW2.
May be strapped to surface supplied air hose and connects to diver whip or directly to EAR-MIC harness...
On Request
Model: SPKR-DR
Underwater Loudspeaker SPKR-DR for COM-DR-HYD Diver Recall Surface to Diver Unit1/4" plug for panelUnderwater Type Connector option available..
On Request
Model: BAT-U01-EM-NIMH
DiveLink BAT-U01-EM-NIMH Rechargeable NIMH Battery Pack with Energy Monitor and LED Display
Battery Pack for COM-FF Head Mount Underwater Communicator units BAT-U01-EM-NIMH
Rechargeable NIMH matched cells for long life
Internal Energy Monitor
LED "Gas Gauge" Display
Charge cutout when..
On Request
Model: MPC
Diver Microphone model for Full Face Mask Type:MPC-AGA to match Interspiro AGA Divator
MPC-DRAGER to match Drager Full Face Mask
MPC-EXO to match Kirby Morgan EXO Full Face Mask
MPC-KM48 to match Kirby Morgan Super Mask M48
MPC-MANTIS to match Mantis Full Face Mask
MPC-POSIEDON to mat..
Model: 97DD-01-01-01-00-00
The First Stage Pressure Reducing Regulator can be installed inside an hyperbaric chamber and
can be used for air and Sat, to supply gas to the BIBS.
The primary function of this regulator as it has been designed is to allow operators in a
hyperbaric chamber to have a reducer dedicated to every s..