Search Criteria
Products meeting the search criteria
Model: SI-Barnet
The prosed instrument is the widely known deadweight tester 9000 Series manufactured by SI-Barnet. The offered version is model 9250-6 with range 0-700 bar.It is oil operated and it comes with the complete set of stainless-steel weights...
4,900.00€
Model: 97DD-05-01-02-00-00
Design and Engineering Features:
Our new generation CBM-U101 DIVING COMPACT BIBS MASK has been rigorously designed, developed
and tested to an operational depth of up to 400 msw in accordance with international technical and safety standards set by NORSOK.
The compact Bibs Mask has been tes..
2,700.00€
Model: 97CM-06-02-01-00-00
The Drass CO2 Scrubber is used as a CO2 removal system in the hyperbaric environment, in chambers and diving bells. The design is continuously enhanced thanks to the hundreds of units installed worldwide. Thanks to its compact size and its efficiency, the installation of the Drass CO2 scrubber on bo..
2,600.00€
Model: 97CE-06-01-01-00-00
Proudly presenting the innovative Drass HUF (Hyperbaric Ultraviolet Flame) Sensor, the only flame
sensor on the market to receive IACS Class Society Type Approval for use in a hyperbaric environment.
Pressure tested up to 50 bar and able to detect a flame at 10 times the distance of standard f..
2,200.00€
Model: 97CD-01-04
The newly released Drass product: iAN GAS ANALYZER is specifically tailored to the saturation and surface diving industry and for application in the medical industry also.This advanced solution provides our clients with both a superior measuring accuracy and a robust hardware that consists of a Disp..
Starting From 1,990.00€
Model: 97CM-06-01-01-00-00
The Interlocking mechanism is a safety device intended to protect any pressure vessel subject to
be opened during routine operation procedures; this includes soda lime pots, Food and Material
Locks, Diving Bell Mating Clamps, etc… The requirement for such a device is present in all Rules and
..
1,900.00€
Model: 97CE-04-01-01-00-00
The Drass 2” Flow Fuses are a safety device intended to protect any PVHO (Pressure Vessel for Human
Occupancy) from rapid unwanted decompression. They are to be installed internally to any
PVHO on each hull passage bigger than 5 mm (ref. DNV-Os-E402 Oct. 2010 Sec. 4 E301).The main purpose of the f..
800.00€
Model: 97CE-01-03-05-00-00
The ambient lighting system is specifically designed
to illuminate the entire compartment from a ceiling
position.
Thanks to the lens employed, which ensures a light
flux up to ten times higher than that typically installed,
a bright and uniform lighting illuminates the entire
comp..
Starting From 705.00€
Model: 97CE-01-04-05-00-00
Drass Bunk lights are specifically designed for diver private lighting, and are usually located alongside
each bunk. Lights are supplied with a wet connector type, a locking sleeve and the interface
cable, which includes a potentiometer, to regulate the light intensity.
On the bottom of the..
Starting From 705.00€
Model: F2806-550
Drass flame sensor cable is designed to accompany Drass Flame Sensor whilst being installed inside of a hyperbaric chamber.The cable is available in both 5 m and 7 m length options to suit your needs...
Starting From 150.00€
Model: Tungum
Tungum has been utilized in the offshore oil and gas industry since 1978 and it has become common knowledge that this material's superiority in marine environments is second to none.From both safety and economic viewpoints, there is no other material that can match the performance and longevity of T..
Starting From 53.86€
Model: 821B-02-02-00-00-00
The fitness machine is designed to provide a means of keeping fit for divers in saturation
conditions. The saturation condition imply usually to be restricted in hyperbaric chambers for one
month. Typical dimension of a chamber is 2, 3 m diameter by 8 m for 6 divers, half-length used to
sle..
0.00€